<%@ page language="java" import="java.util.*" pageEncoding="utf-8"%> <%@ taglib uri="http://java.sun.com/jstl/core_rt" prefix="c"%> <%@ taglib uri="http://java.sun.com/jsp/jstl/functions" prefix="fn"%>

Q/JBSC9389

${leavefactorycheck.equipmentname}出厂检验记录单

出厂编号

${leavefactorycheck.leavefactoryno}

主要技术参数

额定电压

${leavefactorycheck.ratedvoltage}

电操机构电压

${leavefactorycheck.poweroperationv}

额定电流

${leavefactorycheck.ratedcurrent}

分励脱扣器电压

${leavefactorycheck.shuntreleasev}

安装型式

${leavefactorycheck.installationtype}

合闸电磁铁电压

${leavefactorycheck.closingemv}

智能脱扣器型号及规格

${leavefactorycheck.releasemodel}

欠压脱扣器电压

${leavefactorycheck.undervreleasev}

外部附件

${leavefactorycheck.appendix}

备注

${leavefactorycheck.remarkoverall}

序号

检验项目 Inspection Item

技术要求 Technical Requirement

实测结果 Result

备注 Remark

1

一般检查 Check Appearance

金属件、铭牌、二次回路、装配、接地、电气间隙、爬电距离、抽屉座等  Nameplate,secondary loop,Assembly,Earth Marking,  clearance,creepage distance,draw-out and so on

合格 Qualification

${remark1}

2

机械操作特性检查 Check Mechcanical Operation Performance

手动操作断路器：两次闭合，两次断开；两次自由脱扣操作。电动操作断路 器：在额定控制电源的110%和85%时两次闭合，断开操作；两次自由脱扣操作  Manual operation: close and break the breaker twice;make free trip twice.Power operation:close and break the breaker at 110% and 85% rated control power;make free trip twice.

合格 Qualification

${remark2}

3

长延时Ir1 Long-Delay Ir1

1.05Ir1>2h不动作, 1.05Ir1<1h动作   1.05Ir1>2h Without Action, 1.05Ir1<1h Action

A相 ${leavefactorycheck.phasea} 合格 B相 ${leavefactorycheck.phaseb} 合格 C相 ${leavefactorycheck.phasec} 合格 Qualification

${remark3}

4

短延时Ir2 Short-Delay Ir2

0.9Ir2不动作, 1.1Ir2定时限动作   0.9Ir2 Without Action, 1.1Ir2 Delay Action

合格 Qualification

${remark4}

5

瞬时Ir3 Instantaneous Ir3

0.85Ir3不动作, 1.15Ir3瞬时动作   0.85Ir3 Without Action, 1.15Ir3 Instantaneous Action(t<100ms)

合格 Qualification

${remark5}

6

欠压脱扣器 Under voltage Release

≧85%Ue 可靠吸合,(35% -70%)Ue 瞬时或延时断开,<35%Ue不合闸   ≧85%Ue Reliable Closing   (35% -70%)Ue Instantaneous or Delay Break   <35%Ue Refuse to Close

-

${remark6}

7

分励脱扣器 Shunt Release

(70%-100%)Ue 应可靠动作   (70%-110%)Ue Reliable Action

合格 Qualification

${remark7}

8

释能脱扣器 Energy Releasing Release

(85%-100%)Ue 应可靠动作   (85%-110%)Ue Reliable Action

合格 Qualification

${remark8}

9

耐压试验 Voltage Releasing Test

主回路2500V/1s,控制回路1890V/1s,不允许有闪烙、击穿现象   Major Loop 2500V/1s,Control Loop 1890V/1s.   No flashover and destructive phenomenon should be allowed.

合格 Qualification

${remark9}

10

包装检查 Packing inspection

断路器实物必须与箱内外标识的规格一致，箱内附件必须齐全(对照附件表) Products must be consistent with the specifications of identity, accessories in the boxes must be complete(according to the upfile).

合格 Qualification

${remark10}

结论 Conclusion

合格 Qualification

检验员 Inspector

检 ${leavefactorycheck.inspector}

日期 Date

${fn:substring(leavefactorycheck.inspectdate,0,10)}